• ir flam sensor NEW
  • ir flam sensor NEW

ir flam sensor

Arduino components
Availablity In stock
6 JOD
3.5 JOD
IR Flame Sensor Module Detector 4 Pin Temperature
Flame Detection Sensor Module by ADIY is sensitive to the flame but also can detect ordinary light. They are usually used as a flame alarm. Catches a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection point of about 60 degrees, particularly sensitive to the flame spectrum. Sensitivity is adjustable, stable performance. ADIY Flame Sensor Module is used to detect fire/flame sources or other wavelength light sources in the range of 760nm – 1100 nm. It is based on the YG1006 sensor, a high speed, and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation. The sensor can be a great addition to a firefighting robot, it can be used as a robot’s eye to find the fire source. When the sensor detects flame the Signal LED will light up and the D0 pin goes LOW. The module has 2 outputs: Analog, which gives a real-time voltage output signal on thermal resistance and digital which allows temperature thresholds to be set via a potentiometer. Flame Sensor Module – ADIY : Specifications Comparator chip LM393 makes module readings stable. Operating voltage 3.3V-5V. Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection range: up to 100 cm. Adjustable detection range. The detection angle is about 60 degrees, it is sensitive to the flame spectrum

Recent Products